Power to kWh/d problem

Submitted by Guest on Tue, 10/04/2012 - 15:04

Hi All

I have emoncms up & running but have a problem with displaying graphical data on Power to kWh/d.

The updating value appears in my 'Feeds' but the data only shows in the Bar graph with nothing showing in either Real-time or Raw data graphs since monitoring began.

This same data is also missing from the dial display - kWh displays OK but not kWh/d

All other graphical functions appear to be working OK.

Is anyone else experiencing the same problem or am I missing something?

Also, any news on the +/- (centre zero) dial for exported/imported grid power raised in an earlier post?

thanks

Re: Power to kWh/d problem

Submitted by Lloyd on Tue, 10/04/2012 - 17:45.

Have just posted the code changes required for centre zero in the other post (but the spam filter stops me posting a link to it.

Lloyd

Re: Power to kWh/d problem

Submitted by TrystanLea on Wed, 11/04/2012 - 10:00.

Hello, have you selected log to a feed in addition to power to kWhd?

Lloyd: Thats strange, posting links usually work, could you try again?

Re: Power to kWh/d problem

Submitted by Lloyd on Wed, 11/04/2012 - 11:19.

Trying again, here is the post with the centre zero dial code in.

Lloyd

Re: Power to kWh/d problem

Submitted by Lloyd on Fri, 20/04/2012 - 12:11.

This time no trouble with the hyperlink. Before I had to complete a captcha, which I may have got wrong of course. This time, it allowed me to post with no issues at all, and no captcha.

Lloyd

Re: Power to kWh/d problem

Submitted by Lloyd on Sat, 21/04/2012 - 16:23.

Was the original issue ever resolved?

I have emoncms up & running but have a problem with displaying graphical data on Power to kWh/d.

The updating value appears in my 'Feeds' but the data only shows in the Bar graph with nothing showing in either Real-time or Raw data graphs since monitoring began.

This same data is also missing from the dial display - kWh displays OK but not kWh/d

All other graphical functions appear to be working OK.

I'm suffering with the same problem myself - everything else works, just Kwh/d feeds don't plot on real-time or raw.

Thanks

Lloyd

Re: Power to kWh/d problem

Submitted by mharizanov on Sat, 21/04/2012 - 19:12.

Lloyd, did you modify the code so that it takes the correct FEEDID?

<h2>Energy explorer</h2>

</iframe>

</div>

Re: Power to kWh/d problem

Submitted by Lloyd on Sat, 21/04/2012 - 19:58.

It is not kwhdzoomer that is the issue, but the standard graphs available via the feeds page. Is there something special about the way kwhd data is stored?

Lloyd

Re: Power to kWh/d problem

Submitted by dominator99 (not verified) on Wed, 25/04/2012 - 15:47.

My original query on 10/4/2012:

I have emoncms up & running but have a problem with displaying graphical data on Power to kWh/d.

The updating value appears in my 'Feeds' but the data only shows in the Bar graph with nothing showing in either Real-time or Raw data graphs since monitoring began.

This same data is also missing from the dial display - kWh displays OK but not kWh/d

All other graphical functions appear to be working OK.

Has anyone experienced this same problem, apart from myself & Lloyd as I'm no closer to a solution.

In addition I've noticed that the 'size' of both my 'kWhd_solar' & 'kWhd_grid' feeds in the 'feeds' screen stay fixed at 1.1kiB although their 'value' increases over time.

Also, I can't get the Dashboard Energy Explorer to display any data; radio buttons, date/time are showing but the area for graphing is blank!!

On the multigraph display I can plot kWh & kWhd but whereas the kWh plot lists the value on the vertical axis in kWh (cumulative) in multiples of 10kW the kWhd displays W in multiples of 1000W on the vertical axis & neither correspond with the daily figure listed on my GLCD (kWh today figure). Also, the 'left vs right' section shows 2 vertical axes when both columns (left & right) have an entry but the left column is shown on the right of the two axes & vice versa?? - very confusing

I think it was John Cantor's multigraph that showed the vertical axes on the left & right hand side of the main multigraph plot, as expected

Finally, would it be possible to produce a comprehensive explanation of how to set up 'feeds' from 'inputs' for beginners like me so maybe I can see where I'm going wrong

I'm sorry if all the above seems a bit 'picky' but it's frustrating not to be able to produce the expected results.

Re: Power to kWh/d problem

Submitted by EnergyRnR on Fri, 06/07/2012 - 14:02.

I'm seeing this also, so I'm interested to hear whether you've solved it. I had the Energy explorer working but not, no graphs are showing for either the power, kWh, or kWhd Feeds ; OR in the dashboard even though I can see the feed data incrementing.....

not sure how to debug from here.

Eamonn

Archived Forum