Archived Forum

/*

 EmonTx CT123 example

 

 An example sketch for the emontx module for

 CT only electricity monitoring.

 

 Part of the openenergymonitor.org project

 Licence: GNU GPL V3

 

 Authors: Glyn Hudson, Trystan Lea

 Builds upon JeeLabs RF12 library and Arduino

 

*/

 

const int CT1 = 1; 

const int CT2 = 0;                                                      // Set to 0 to disable CT channel 2

const int CT3 = 0;                                                      // Set to 0 to disable CT channel 3

 

#define freq RF12_433MHZ                                                // Frequency of RF12B module can be RF12_433MHZ, RF12_868MHZ or RF12_915MHZ. You should use the one matching the module you have.

const int nodeID = 10;                                                  // emonTx RFM12B node ID

const int networkGroup = 210;                                           // emonTx RFM12B wireless network group - needs to be same as emonBase and emonGLCD

 

const int UNO = 1;                                                      // Set to 0 if your not using the UNO bootloader (i.e using Duemilanove) - All Atmega's shipped from OpenEnergyMonitor come with Arduino Uno bootloader

#include <avr/wdt.h>                                                     

 

#include <JeeLib.h>                                                     // Download JeeLib: http://github.com/jcw/jeelib

ISR(WDT_vect) { Sleepy::watchdogEvent(); }                              // Attached JeeLib sleep function to Atmega328 watchdog -enables MCU to be put into sleep mode inbetween readings to reduce power consumption 

 

#include "EmonLib.h"

EnergyMonitor ct1,ct2,ct3;                                              // Create  instances for each CT channel

 

typedef struct { int power1, power2, power3, battery; } PayloadTX;      // create structure - a neat way of packaging data for RF comms

PayloadTX emontx;                                                       

 

const int LEDpin = 9;                                                   // On-board emonTx LED 

 

void setup() 

{

  Serial.begin(9600);

  Serial.println("emonTX CT123 example"); 

  Serial.println("OpenEnergyMonitor.org");

             

  if (CT1) ct1.currentTX(1, 115.6);                                              // Setup emonTX CT channel (channel, calibration)

  if (CT2) ct2.currentTX(2, 115.6);

  if (CT3) ct3.currentTX(3, 115.6);

  

  rf12_initialize(nodeID, freq, networkGroup);                          // initialize RFM12B

  rf12_sleep(RF12_SLEEP);

 

  pinMode(LEDpin, OUTPUT);                                              // Setup indicator LED

  digitalWrite(LEDpin, HIGH);

  

  if (UNO) wdt_enable(WDTO_8S);                                         // Enable anti crash (restart) watchdog if UNO bootloader is selected. Watchdog does not work with duemilanove bootloader                                                             // Restarts emonTx if sketch hangs for more than 8s

}

 

void loop() 

{ 

  if (CT1) {

    emontx.power1 = ct1.calcIrms(1480) * 240.0;                           // Calculate CT 1 power

    Serial.print(emontx.power1);                                          // Output to serial  

  }

  

  if (CT2) {

    emontx.power2 = ct2.calcIrms(1480) * 240.0;

    Serial.print(" "); Serial.print(emontx.power2);

  } 

 

  if (CT3) {

    emontx.power3 = ct3.calcIrms(1480) * 240.0;

    Serial.print(" "); Serial.print(emontx.power3);

  } 

  

  emontx.battery = ct1.readVcc();

  

  Serial.print(" "); Serial.print(emontx.battery);

  Serial.println(); delay(100);

 

  send_rf_data();                                                       // *SEND RF DATA* - see emontx_lib

  emontx_sleep(5);                                                      // sleep or delay in seconds - see emontx_lib

  digitalWrite(LEDpin, HIGH); delay(2); digitalWrite(LEDpin, LOW);      // flash LED

}

EmonTX.cpp.o: In function `loop':

EmonTX.cpp:64: undefined reference to `EnergyMonitor::calcIrms(int)'

EmonTX.cpp:69: undefined reference to `EnergyMonitor::calcIrms(int)'

EmonTX.cpp:74: undefined reference to `EnergyMonitor::calcIrms(int)'

EmonTX.cpp:78: undefined reference to `EnergyMonitor::readVcc()'

EmonTX.cpp.o: In function `setup':

EmonTX.cpp:48: undefined reference to `EnergyMonitor::currentTX(int, double)'

EmonTX.cpp:49: undefined reference to `EnergyMonitor::currentTX(int, double)'

EmonTX.cpp:50: undefined reference to `EnergyMonitor::currentTX(int, double)'

 

What

 

am I doing wrong?