GivMon might get CE marked - Boards ordered

So i thought i would start my own thread, but all credits goes to Rob for this one

 

Have been in contact with PCB manufacturer in UK and got a reasonble quote on a 100 pcs, same for 100 cases like the multicomb Rob used, thou these are not multicomb but still UK manufacturer.

 

Tweaking the PCB design back and forth and only left to get it voltage tested 

 

Then sign a EU conformity declaration and it might well show up in the OEM shop

 

Aiming for 10 prototypes ordered before next week is over

 

 

boelle's picture

Re: GivMon might get CE marked - Boards ordered

Polishing the layout and sending off for proto's today

boelle's picture

Re: GivMon might get CE marked - Boards ordered

Boards ordered, need to order the components later today

boelle's picture

Re: GivMon might get CE marked - Boards ordered

got the boards... looks ok

 

the components to stuff 10 boards comes with a hefty pricetag so this will be taking more time  than i thought

 

 

/B

boelle's picture

Re: GivMon might get CE marked - Boards ordered

ditching the project.... got both the givmon boards and signal condition interface...

 

anyone interested in taking the bare boards of my back ? paid 20,49+13,80$ for them and there are 10 of each

if interested send a PM... i might be very slow as i dont stop by each day and the e-mail alert system does not work

Robert Wall's picture

Re: GivMon might get CE marked - Boards ordered

boelle's picture

Re: GivMon might get CE marked - Boards ordered

done...  i have boards worth of 27.60$

10 boards of the Givmon and 10 of the signalcondition interface. I dont have the eagle files anymore so you would have to trace tracks and messure component holes with a caliper...

 

i also have a board that makes an bootloader shield for the arduino mega... there are tons of guides on how to use an uno, but there are a few on how to use the mega also... google is your partner in crime here... i made a mistake on the board... one track has to be cut and 2 has to be re-routed with some wire... that i can make a quick instruction for. i will throw in 9 of these boards free of charge. i have RS components for some of the bits on those... but the stacking headers are a pain to get hold of... if you are naughty you can order samples from Samtec...

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.