inactive inputs/RFM12Pi debug?

Hello folks,

My setup consists of  emontx and raspberry pi + RFM12Pi, running emoncms' image.

emontx is loaded with "emonTx_CT123_Voltage" firmware

I created the inputs, node 10, input 1,2,3 and 4 on emoncms, but it says inputs are inactive. The devices are sitting real close to each other, less than 2 meters apart.

Is there a way to debug/trace the input from the RFM12Pi on raspberry pi shell? How can I? 

What do you suggest me to do?

 

Thanks,

MeHale

Jérôme's picture

Re: inactive inputs/RFM12Pi debug?

Hi.

See the README here. There is a logging feature that might help.

You don't have to create inputs, they are created automatically when data is received.

If nothing is received, check the parameters of the radio (group, freq).

mehale's picture

Re: inactive inputs/RFM12Pi debug?

Hi Jerome,

Thank you for your suggestion!

I have it working now!

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.