Home » Forums » Archived: Hardware

Yun with PoE version + EmonTx shield

Submitted by Oswaldo on Wed, 06/04/2016 - 23:10

Can work the Yun ( PoE version) with the EmonTx shield ?

Regards,

Oswaldo

PoE = Power over Ethernet
Moderator, BT

‹ Mains Voltage Consistency EmonTX3 radio problems ›
»
Robert Wall's picture

Re: Yun with PoE version + EmonTx shield

Submitted by Robert Wall on Thu, 07/04/2016 - 15:54.

I'm no Arduino expert, you need to check the interrupts used by the Ethernet driver and those use by the emonTx shield (for the radio module), and the I/O ports used. If I remember correctly, some years ago, we discovered some Ethernet Shields / Arduino clones would not work because of problems like that. All the information you need about the emonTx Shield is in Resources > Hardware Wiki.

»
Oswaldo's picture

Re: Yun with PoE version + EmonTx shield

Submitted by Oswaldo on Sun, 10/04/2016 - 12:17.

You can help me, with the physical connections that I do between Yun (PoE) and the EmonTx shield.

Regards,

Oswaldo

»

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.