When I log "Total pulse count to pulse increment" I get the total number of pulses not the difference between the previous and the current. What do I do wrong?
I have connected my water meter to emonCMS. The input is the total number of pulses. I would like to see the current water usage and water usage pr day. I have setup it up like this:
1. log to feed
2. Total pulse count to pulse increment
3. kWh to kWh/d - I hope will give me my water usage pr. day.
I would also like to have som sort of total water usage that is not reset if the input is reset to zero (in case i turn off the emonTX).
Re: Loging pulses
I have the same problem.. try to add after point 2
....
2.5. log to feed -> water pulse
...