Home » Forums » Archived: Hardware

Broken links on calibration page

Submitted by Ian Davies on Thu, 28/05/2015 - 21:41

Hi there,

Looking at the Calibration page http://openenergymonitor.org/emon/buildingblocks/calibration in the section called Procedure there are three broken links:

emonTx_CT123 points to https://github.com/openenergymonitor/emonTxFirmware/tree/master/emonTx_C...

 

emonTx_CT123_Voltage. points to https://github.com/openenergymonitor/emonTxFirmware/tree/master/emonTx_C...

 

the default sketch points to https://github.com/openenergymonitor/emonTxFirmware/tree/master/emonTxV3...

Regards

Ian

(if there is a different way to report broken links, please let me know)

‹ dual radio on emonbase? Post emonPi Bug Reports here ›
»
Robert Wall's picture

Re: Broken links on calibration page

Submitted by Robert Wall on Thu, 28/05/2015 - 22:21.

Noted, thanks. It appears that G&T have moved things around.

»

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.