I have now successfully built my EmonTX and EmonBase units, loaded the code and have a working test setup with Pachube. What i want to do know, is fit the EmonTX to a case.
Will the EmonTX v2.0 fit the Farnell case as per v1.4? (MULTICOMP - BC2W - CASE, ABS, W/CLIP, WHITE)
Also i am after wiring up my encapsulated temperature sensor from the shop. But i cannot find any reference to the wiring.
Would i be right in assuming GND = Black, Vcc = Red and Data = White?
That's indeed the case that Glen mentions on his webshop pages (for example http://shop.openenergymonitor.com/emontx433-kit/ just above the documentation headline).
My EmonTX was fitted to a case from Dutch/German Conrad (article 522733). It did however require some additional filing of the PCB to make it fully fit (and of course cutting holes for all the plugs).
Regarding the wiring, I'm also curious what the scheme is.
For the temperature sensor wiring then:
Red - Vcc
Black - Gnd
White - Data
Taken from article - http://openenergymonitor.org/emon/node/530
Wiring diagram for pulse and temperature sensor connections can be found here: http://openenergymonitor.org/emon/emontx/reference%20
Open-source tools for energy monitoring and analysis. This project uses the GNU General Public Licence